Wheel Powder Coating

Powder Coated Wheels

Wheel powder coating is a type of coating that is applied as a free-flowing, dry powder. The main difference between a conventional liquid paint and a powder coating is that it does not require a solvent to keep the binder and filler parts in a liquid suspension form. The coating is typically applied electrostatically and is then cured under heat to allow it to flow and form a “skin.” The powder may be a thermoplastic or a thermoset polymer. It is usually used to create a hard finish that is tougher than conventional paint.

POWDER COATING WHEELS PROCESS: PREPARATION WORK

Wheel Removal and Inspection

The first step in our wheel powder coating process is to carefully remove the wheels from your vehicle. Our technicians then conduct a thorough inspection to identify any existing damage or imperfections that may require additional attention.

Stripping and Sanding

Any existing coatings, finishes, or clear coats are carefully stripped from the wheels using specialized chemical strippers or mechanical methods. Once stripped, the wheels are sanded to create a rough surface that will allow the wheel powder coating to adhere properly.

Degreasing and Cleaning

After sanding, the wheels undergo a thorough degreasing process to remove any remaining contaminants, oils, or residues. This is a crucial step as any remaining impurities can compromise the adhesion of the powder coating.

Surface Treatment

Depending on the condition of your wheels, our technicians may recommend additional surface treatments to ensure optimal adhesion of the wheel powder coating. These treatments can include chemical etching, sandblasting, or the application of a specialized primer.

Masking and Protection

Before the wheel powder coating process begins, our team takes extra precautions to mask and protect any areas that should not be coated, such as wheel bearings or lug nut recesses. This step ensures a clean and precise finish.

*Contact us for more information.